|
|
Model
|
|
Condor™
|
|
Cab
|
|
68" BBC low cab forward, set back front axle
|
|
Steering
|
|
Left hand drive; right hand drive; dual drive; left hand drive with stand-up right hand drive
|
|
Rear Field of Vision
|
|
There is a design provision for the installation of optional rear vision monitor, camera and wiring systems
|
|
Engines
|
|
Cummins ISM, ISL, and ISC and Caterpillar CFE, C-10 and C-12 available in advertised horsepower ranging from 275 to 380 hp.
|
|
Radiator
|
|
1,116 sq. in. radiator is standard, 1,100 sq. in. with PTO provision is optional
|
|
Maintenance Access
|
|
Service module at back of cab accessible from ground right hand and left hand
|
|
Front Frame Configuration
|
|
Front PTO hydraulic pump well aft of front bumper and forward of radiator protecting the pump and eliminating the need for a front frame or bumper extension
|
|
Power Takeoffs
|
|
Front engine and transmission mounted PTOs
|
|
|
Transmissions
|
|
Allison MD and HD series automatic
|
|
Front Axles
|
|
Meritor non-driving single axles available in capacities from 12,000 lbs. to 20,000 lbs.
|
|
Rear Axles
|
|
Meritor single and dual drive available in capacities ranging from 23,000 lbs. to 70,000 lbs.
|
|
Front Suspensions
|
|
Freightliner single taperleaf and single flatleaf available in capacities ranging from 12,000 lbs. To 23,000 lbs.
|
|
Rear Suspensions
|
|
Freightliner TufTrac® dual drive; AirLiner single and dual drive; flatleaf single and dual drive; Reyco single drive; Hendrickson dual drive walking beam suspensions; Chalmers single and dual drive rear suspensions; Neway single and dual drive rear suspensions; Ridewell dual drive rear suspensions. Suspensions available in capacities from 23,000 lbs. to 65,000 lbs.
|
|
Pusher/Tag Axles
|
|
Hendrickson available in either self-steer or non-steer configurations
|
|
Front Tires
|
|
Front tires rated to 20,000 lbs. or higher from 315/80R22.5 through 445/60R22.5
|
|
Frame Rails
|
|
11 /32" x 10 15 /16" to 7 /16" x 13 1 /8" variable depth rails; full C-channel inner frame reinforcement; section modulus from 17.21 to 31.5 cu. in. per rail; RBMís from 1,893,000 to 3,432,000 lbf. in.
|
|
